歡迎訪問上海峰志儀器有限公司官網!
上海峰志儀器有限公司shanghai fengzhi instrument co,.ltd
全國咨詢熱線:13818683556
您的位置:首頁>>無損檢測資訊>>行業動態

美國耶拿(美國UVP)B-100AP高強度紫外線燈

作者: 時間:2024-06-12 14:18:37瀏覽127 次

信息摘要:

上海峰志儀器有限公司代理美國耶拿(原美國UVP公司)生產的便攜式高強度紫外線燈B-100AP和便攜式黃綠光表面檢查燈B-100YP,現針對上海地區終端客戶提供免費演示活動,詳情請聯系上海峰志儀器有限公司。

美國耶拿(美國UVP)B-100AP高強度紫外線燈

上海峰志儀器有限公司代理美國耶拿(原美國UVP公司)生產的便攜式高強度紫外線燈B-100AP和便攜式黃綠光表面檢查燈B-100YP,現針對上海地區終端客戶提供免費演示活動,詳情請聯系上海峰志儀器有限公司。

B-100AP系列高強度紫外線燈配有耐熱塑料(Cool-Touch)外殼,無論燈管運行多長時間,用戶都可以操作燈頭,非“P”型號采用鋁制燈頭制造,型號(B-100SP 除外)均標配 100 瓦點燈泡;燈泡的額定壽命為 5000 小時,B-100SP 隨附的自鎮流燈泡的平均壽命為 450 至 2000 小時,具體取決于使用模式,燈頭連接到變壓器底座,免提使用(B-100SP 除外的型號),允許燈頭旋轉 360°;從底座上取下 lamp 以增加移動性

BB-100AP高強度紫外線燈g

UVP Blak-Ray B-100 系列高功率紫外線燈提供明亮的輻照度,以實現佳熒光。B-100AP 燈放置在變壓器底座中,無需手動操作。

B-100AP 和 B-100AP/R

B-100AP 型號具有 100 瓦長波紫外線、冷觸感外殼和鎮流器底座。在 18 英寸處。(457 毫米),該燈產生約 5 英寸的高強度紫外線輻照度中心。直徑(127 毫米)。燈頭在安裝到底座上時可以旋轉 360 度,無需手動操作,或者可以從底座上取下燈。8 英尺初級和次級電源線。為了增加移動性,請選擇 B-100AP/R,其中包括 20 英尺(6.1 米)的主線和輔助線。這些燈的用途包括無損檢測和熒光檢測。

B-100A 和 A-100AR

長波 B-100A 采用防刮鋁制外殼制造,該外殼通過 8 英尺長的繩索連接到鎮流器底座;包括 8 英尺輔助電源線。100 瓦長波紫外燈泡非常適合檢測應用。為了增加移動性,請選擇 B-100AR,其中包括 20 英尺(6.1 米)的主線和輔助線。這些燈的用途包括無損檢測和熒光檢測。

B-100SP

這款 90 瓦長波自鎮流燈是一款高度便攜的高強度燈,適用于汽車泄漏檢測應用。鎮流器直接內置在燈泡中。B-100SP 具有 Cool-Touch 外殼和 8 英尺(2.44 米)的電源線。

B-100Y 和 B-100YP

這些型號具有黃色濾光片,可阻擋短于 500 nm 的波長,并在 543、574 和 576 nm 處產生三條強汞譜線。產生高對比度的光用于細小的表面顆粒檢測。使用此燈通??梢钥吹叫≈?10 微米的顆粒。B-100Y采用鋁制外殼,B-100YP采用塑料外殼。這些燈非常適合半導體晶圓檢測,因為大多數光刻膠吸收發生在 450 nm 以下。

UVP High Intensity UV Lamps

The UVP Blak-Ray B-100 Series high powered UV lamps offer brilliant irradiance for optimum fluorescence. The B-100AP lamp is placed in the transformer base for hands-free operation.

B-100AP and B-100AP/R

B-100AP models feature 100 watt longwave UV, Cool-Touch housing and ballast base. At 18 in. (457 mm), the lamp produces a highly intense center of UV irradiance about 5 in. (127 mm) in diameter. Lamp head can rotate 360 degrees when attached to the base for hands-free operation or lamp can be removed from the base. 8 ft primary and secondary cords. For added mobility, select the B-100AP/R which includes 20 ft (6.1m) primary and secondary cords. Uses for these lamps include non-destructive testing and fluorescence inspection.

B-100A and A-100AR

The longwave B-100A is manufactured with a scratch-resistant aluminum housing which connects to ballast base with an 8 foot cord; 8 foot secondary cord is included. The 100 watt longwave UV bulb is excellent for inspection applications. For increased mobility, select the B-100AR which includes 20 ft (6.1m) primary and secondary cords. Uses for these lamps include non-destructive testing and fluorescence inspection.

B-100SP

This 90 watt longwave, self-ballasted lamp is a highly portable, high intensity lamp for automotive leak detection applications. The ballast is built directly into the bulb. The B-100SP features the Cool-Touch housing and an 8 ft. (2.44m) cord.

B-100Y and B-100YP

These models feature a yellow filter which blocks wavelengths shorter than 500 nm and produces three strong mercury lines at 543, 574 and 576 nm. The high contrast light is produced for fine surface particle detection. Particles down to 10 microns are routinely visible with this lamp. The B-100Y is built with aluminum housing and the B-100YP with a plastic housing. These lamps are excellent for semiconductor wafer inspection as most photoresist absorption occurs below 450 nm.

Applications include:

Fluorescence Inspections

Non Destructive Testing

Leak Detection

Readmission

*Product performance and effectiveness will depend on the user.*